3PUMP Fire Pump Package — 1000 GPM @ 10 Bar

Overview

This 3PUMP fire pump package is rated for 1000 GPM at 10 Bar, combining an electric-driven main pump, a diesel-driven standby pump, and a jockey pump in one submitted package, model 3P 5×4-10.2L.

Package Configuration

• Electric main pump: 3P 5×4-10.2L, driven by a 150 HP, 415V / 50Hz / 3-phase Intem 280S-2 motor (Class F insulation, IP55). Cast iron casing, bronze impeller, stainless steel shaft, mechanical seal.
• Diesel standby pump: 3P 5×4-10.2L, driven by a 150 HP Power 6102BZQ engine at 3000 RPM. Same casing, impeller, shaft, and seal construction as the electric pump.
• Jockey pump: Model RV10-12.
• Controllers: Three individual LS-brand pump controllers.

Technical Highlights

• Rated duty: 1000 GPM at 10 Bar
• Performance tested at the NFPA 20 test points (150% flow and churn/shutoff) at both 2950 RPM and 3000 RPM — both points PASS
• Electric motor: 150 HP, 415V/50Hz/3-phase, Class F insulation, IP55
• Diesel engine: 150 HP, 3000 RPM
• Valves referenced in the submittal: Ontor / Gala

Listing / Source Note

This Product is documented from a Non-UL Technical Submittal supplied by 3PUMP. The package is not represented as UL Listed or FM Approved.

3PUMP Fire Pump Package — 500 GPM @ 8 Bar

Overview

This 3PUMP fire pump package is rated for 500 GPM at 8 Bar, combining an electric-driven main pump, a diesel-driven standby pump, and a jockey pump in one submitted package, model 3P 4×3-10.2.

Package Configuration

• Electric main pump: 3P 4×3-10.2, driven by a 75 HP, 415V / 50Hz / 3-phase Intem 225M-2 motor (Class F insulation, IP55). Cast iron casing, bronze impeller, stainless steel shaft, mechanical seal.
• Diesel standby pump: 3P 4×3-10.2, driven by an 84 HP Power 4102 engine at 3000 RPM. Same casing, impeller, shaft, and seal construction as the electric pump.
• Jockey pump: Model RV10-10.
• Controllers: Three individual LS-brand pump controllers.

Technical Highlights

• Rated duty: 500 GPM at 8 Bar
• Performance tested at the NFPA 20 test points (150% flow and churn/shutoff) at both 2950 RPM and 3000 RPM — both points PASS
• Electric motor: 75 HP, 415V/50Hz/3-phase, Class F insulation, IP55
• Diesel engine: 84 HP, 3000 RPM
• Valves referenced in the submittal: Ontor / Gala

Listing / Source Note

This Product is documented from a Non-UL Technical Submittal supplied by 3PUMP. The package is not represented as UL Listed or FM Approved.

3PUMP Fire Pump Package — 750 GPM @ 9 Bar

Overview

This 3PUMP fire pump package is rated for 750 GPM at 9 Bar, combining an electric-driven main pump, a diesel-driven standby pump, and a jockey pump in one submitted package, model 3P 5×4-10.2.

Package Configuration

• Electric main pump: 3P 5×4-10.2, driven by a 100 HP, 415V / 50Hz / 3-phase Intem 250S-2 motor (Class F insulation, IP55). Cast iron casing, bronze impeller, stainless steel shaft, mechanical seal.
• Diesel standby pump: 3P 5×4-10.2, driven by a 108 HP Power 4105BZ engine at 3000 RPM. Same casing, impeller, shaft, and seal construction as the electric pump.
• Jockey pump: Model RV10-10.
• Controllers: Three individual LS-brand pump controllers.

Technical Highlights

• Rated duty: 750 GPM at 9 Bar
• Performance tested at the NFPA 20 test points (150% flow and churn/shutoff) at both 2950 RPM and 3000 RPM — both points PASS
• Electric motor: 100 HP, 415V/50Hz/3-phase, Class F insulation, IP55
• Diesel engine: 108 HP, 3000 RPM
• Valves referenced in the submittal: Ontor / Gala

Listing / Source Note

This Product is documented from a Non-UL Technical Submittal supplied by 3PUMP. The package is not represented as UL Listed or FM Approved.